Sparvar graffiti-killer for the rapid removal of graffiti on most surfaces. Masonry, wood, metal, asphalt, etc.

Oops! Due to the strong solvent power of Sparvar graffiti Killer is an examination of the solving of behavior essential to the contaminated ground, before widespread use. Test on an inconspicuous area if the graffiti-killer does not attack the surface and damaged.

Not on muster vinylhaltigem plastic or Styrofoam. The longer the contact time of the Sparvar graffiti Killers on contaminated land, the stronger the base is attacked. On sensitive surfaces, we therefore recommend a short exposure time of around 30 seconds.

Due to the good adhesion of modern sprays, it is unavoidable in the removal of unwanted graffiti often that the surface must be painted or repainted after the removal of graffiti. The unwanted graffiti removed as quickly as possible because a cured paint spray is difficult to remove. In any case, refrain recommended a removal of the graffiti is unwanted, because otherwise opacity problems with latex paints are.

Instructions:
Tired and just spray the surface is completely covered. Oops examined first in an inconspicuous area of its implications.
Wipe with absorbent kitchen paper the grossest impurity. Thereafter, the area once again fill with graffiti-killer with wet spray and wipe with a lint-free cloth, the loosened ink particles. Repeat several times, depending on the degree of pollution. It is best to use solvent-resistant gloves to protect your hands.
Porous surfaces (walls, etc.) after spraying pre-treated with a scrubbing brush and wipe with wet concludes with a lint-free cloth, the loosened ink particles.

Alternatively, the loosened paint particles in outdoor areas can be sprayed with a high pressure water device.
If the ink particles remain in the partly porous walls, we recommend a rich layer of graffiti-killer in this area and allow to dry spray. After drying shall be a white film on the treated surface and thus covers the ink particles. Can conclude without any problems, the opacity of the wall will be painted with emulsion paint commercial.